Signal – 528 kb/s 2B1Q format.
Loop loss – 35 dB nominal @ 112 kHz
Nominal impedance – 135 ohm.
Contains gas tube and solid-state secondary protection on all connections.
Two sets of terminals for the DSL and one set of terminals for Express Power, plus one ground terminal.
Up to ±190 Vdc between Tip or Ring to ground.
2.8 watts nominal.
Single repeater mounts in an Outside Network Interface (ONI) type plastic enclosure designed for pole or stake mounting. Approximately 11” high x 10.5” wide x 4” deep.
-40 to +60°C, operating
0 to 95% RH, no condensation.